3 màquines de tall de canonades de plasma aixs cnc amb diàmetre de tall de 250mm i 6000mm de longitud de canonada

3 Aixs CNC Plasma Pipe Cutting Machine With Cutting Diameter 250mm and 6000mm Pipe Length

Característica

---

El curl  CNC tube phase line cutting machine is a kind of equipment for automatic calculation and cutting of the end of the pipe ends. This machine is widely used in shipbuilding, construction, petrochemical, machinery, steel structure, lattice structure metallurgy and other industries of pipeline structural parts cutting processing. These industries have a large number of the curve line hole, the combined with the pipeline end, also commonly known as "shrimp festival" elbow, such processing USES template making, lineation, mostly artificial lofting, manual cutting, grinding and other backward and the method of heavy and complicated, and our factory manufacturing accurl  CNC pipe cutting machine series, cutting the workpiece can be very convenient, and workers need hardly programming operation, simply enter reciprocal parameters such as the radius of the pipe, the intersection Angle, the machine can automatically cut out the curve of the pipe, phase injection hole, and welding mouth, no longer need to manual polishing.

accurl CNC pipe triaxial nozzle-vessel junction line cutting machine CNC control interface with graphics and data combination, operation is very simple, just put the head and pipe radius, intersection Angle, cutting speed parameters such as buttons, press the "start" button, the input system can automatic ignition, preheating, cutting and automatic operation. In the software, reasonable cutting is designed to introduce the lead wire to ensure that the quality of the cutting surface is guaranteed. After each cut, the parameters can be saved as files for the use of the same workpiece in the future.
The cutting mode of curl  CNC tube triaxial line cutting machine is flame or plasma cutting, the maximum minimum cutting pipe diameter and pipe length can be designed and manufactured according to the user's requirements.
accurl  CNC tube triaxial line cutting machine, cutting pipe diameter: 30mm- 300mm, cutting pipe length: 6000mm
Temperature: - 5-40 ℃; Humidity of 90% or less; Power supply: 220V plus or minus 10% 50Hz;
Equipment CNC control interface with graphics and data combination, operation is very simple, just put the head and the branch pipe radius, the parameters such as intersecting Angle, cutting speed button press the "start" button, the input system can automatic ignition, preheating, cutting and automatic operation. In the software, reasonable cutting is designed to introduce the lead wire to ensure that the quality of the cutting surface is guaranteed. After each cut, the parameters can be saved as files for the use of the same workpiece in the future.
The design is people-oriented, with simple operation of Chinese and English interface, advanced and reliable equipment structure, suitable for long-term continuous processing, batch processing, and stable and reliable operation control.

Model	CNCPLASMA-25600
Cutting pipe diameter	30- 300mm
Effective cutting length of pipe	6000mm
Maximum load of pipe	1000 kg
Cutting wall thickness	<=19mm(The size of plasma power can be matched)
Velocitat de tall	<=6000mm/min
Control shaft number	Three axis
eix X	axis of spindle
Eix Y	the cutting torch travels along the axis of the pipe shaft to the horizontal axis
Eix Z	cutting and lifting shaft
Basic Configuration:
Interfingering lines nc pipe cutting machine is mainly composed of system control cabinet, driving device, high automatic tuning device, clamping device, safety device, guide rail, gas path system, plasma cutting system, etc.
Numerical control system	Shanghai jiaotong pipe line special control system 1 set
Motor	Ray saibu motor 2PC
Sistema de conducció	Shenzhen resai drive 2 PC
Automatic height adjusting device	Starr raised the controller
Guide	6 M
Potència del plasma	Bosman plasma power 100A (a set of 10-meter special plasma gun)
Adjustable pipe bracket	3 sets
Self-centering chuck	1 conjunt
Bracket on the machine head	1 conjunt
Lower frame	1 conjunt
Machine head component	1 conjunt
Positioning Accuracy Of Machine
It can meet the national standard of the cut steel pipe, and it can reach the precision of the length dimension of the workpiece by 0.2mm/ 2000mm. The accuracy of the bus location is less than or equal to 0.5mm. The gap error of the fitting joints of all kinds of intersected lines is less than or equal to 0.5mm.
1. X-axis - pipe shaft rotation axis
Sistema d’accionament	Precision gear box, gear accessory drive
Velocitat	0.1-25r/min
Precisió de posicionament	± 0,3 mm
2.Y-axis - cutting torch along the shaft of the pipe shaft to the horizontal axis
Sistema d’accionament	Precision gearbox, gear, rack drive
Velocitat de tall	<=6000mm/min
Longitud de tall	6000mm
Precisió de posicionament	±0.2mm

Main Functions Of Equipment

---

1. This màquina de tallar adopts plasma cutting (also can be configured flame cutting), which can cut carbon steel tube and cut stainless steel pipe. This cutter is easy to operate and can be automatically cut by entering the pipe diameter, the intersection of the supervisor and the branch, the Angle of intersection and cutting speed, etc. You don't have to do complicated calculations. And can cut on the head of multiple different direction, the curve of the diameter of the cylindrical hole and can in a curve cutting cylindrical tube department end, satisfaction of the branch pipe axis and axis eccentricity and tilt of eccentric vertical intersection, the intersection of conditions. It also has the function of cutting the two ends of the pipe with different diameters and different diameters of the cylinder.
2. The màquina de tallar can be cut at the Angle and Angle of the tube according to the user's needs. Cutting in the circular tube welding elbow "shrimp festival" the ends of the inclined cutting surface, also can in the circular tube department cut oblique cut face, p 25 ° slope (with steel pipe axis Angle); Or directly cut off the pipe. The intersecting line end of the intersecting line of the cutting function is also capable of cutting square holes and lumbar holes in the circular tube.
Introduction of control system
1. 7-inch high resolution color LCD display, humanized operation interface, optimized operation steps, the bottom of the screen with operation prompt, flexible and efficient, easy to learn;
2. Chinese and English menu switching, suitable for all kinds of operators at home and abroad;
3. Cutting function;
3.1. Machining any pipe diameter pipe;
3.2. The end cutting function of pipe fittings can be arbitrarily set Angle;
3.3. The processing function of the diameter pipe (V word saddle) ;
3.4. The opening slot of the pipe part can be arbitrarily set to the slot size and slot Angle;
3.5. Xiami waist elbow cutting, can set the number of sections, elbow Angle;
3.6. Eccentric saddle cutting;
3.7. The female tube perforated cut, can match mount type, insert type branch;
3.8. Open hole function of any shape, realize the effective cutting of any figure above the circular tube, can design the hole shape with CAD;
3.9. Multiple saddle head branch cutting;
3.10. Slot compensation function;
3.11. Full automatic nesting function.
Features Of Plasma Power
IGBT soft switch technology is adopted, with high efficiency and small loss, improving IGBT working conditions and improving IGBT reliability;
2. With wide voltage adaptability, the cutting current is very stable;
3. Have the function of overpressure, underpressure and overheat protection;
4. The cutting current soft start, reduce the arc impact, and reduce the consumption of cutter accessories;
5. The cutting current is not level adjustable, suitable for the work of different thickness;
6. The arc is good, the incision is clean and the process performance is excellent;
7. Fast cutting speed and high production efficiency, more than 2-5 times faster than traditional gas cutting speed;
8. Using cheap compressed air to cut the gas source, cutting cost is low;
9. Suitable for cutting of various metal materials such as carbon steel, alloy steel and nonferrous metals;

Random Attachment
Standard random tools	1 conjunt
Power line	1 root
Plasma cutting nozzle	10 sets
Plasma protective cap	2 sets
Tube nesting software	1 conjunt
Adjustable foot	1pc
Usb flash drive	1 pc
Descripció del producte	1 pc
Product certificate	1 pc
Product warranty card	1 pc
Equipment Debugging And Installation
The supplier shall be responsible for the installation and commissioning of equipment on the demand side. The buyer should cooperate with the supplier to provide the necessary support for installation of the equipment and put the electricity, gas, and piping in place in advance.
The equipment installation and commissioning shall be provided by the supplier. If the supplier has actual difficulties, the buyer should provide the assistance within its ability.
The buyer shall prepare the pipe materials and other supporting materials necessary for the commissioning of the equipment before the commissioning personnel of the supplier arrives at the site.
When the equipment is installed and debugging, the factory provides technical support for free, instructs the user to be familiar with and master the equipment performance. Free operation and maintenance personnel training to achieve the level of independent operation.

 

Etiquetes: proveïdor de màquines de tall làser