hot selling small waterjet ceramic tile cutter

tallador de rajoles de ceràmica petita amb aigua calenta

CNC waterjet ceramic tile cutter is the most flexible and cost-effective cutting machine available. As a cold-cutting process that eliminates slag deformation and dross wast--unfortunate effects found in plasma and laser cutting process. Moreover APW small waterjet cutting machine enable you to cut a variety of applications with ease. Whatever the shape, dimension or material, our easy-to-use software makes the job easy.

Descripció del producte

There are four parts in our small waterjet ceramic tile cutter . They are intensifier pump; cutting table; CNC controller and Auto abrasive feeder.

A small waterjet ceramic tile cutter is made up of 4 key components, that is Intensifier pump; Cutting table; CNC controller; Auto abrasive feeder

ntensifier Pump	Max. water pressure	410Mpa
	Continuous working pressure	360-380Mpa
	Max. oil pressure	20Mpa
	Motor power	37KW/50HP
	Cutting water inlet pressure	0.3Mpa
	Cooling water inlet pressure	0.3Mpa
	Font d'alimentació	380V/50HZ/3PH
	Max. flow rate	3.7L/Min
	Oil tank volum	30Gal.(114L)
Taula de tall	Structural style	Cantilever style
	Zona de tall	2000x1000x150mm
	Max. moving speed for X/Y-axis	6000 mm/min
	Max. moving speed for Z-axis	1000 mm/min
	Load bearing	500kg/ Squre meter
	Control de precisió	0,01 mm
	Precisió de tall	0,1 mm
	Font d'alimentació	220V
	Way of drive	AC Servo
	X/Y-axis structure	Aluminum structure
Cap de tall	Mode	3-axis
	Max. orifice diameter	0.33mm
	Max. nozzle diameter	1.02mm
	Z-axis step motor	0.9N.M
Controlador CNC	15 inch LCD monitor
	Admet fitxers de codi DXF i NC
	Programari: Windows XP
	Resistance of the shoch and electro-magnetic
	La funció clau
	Forward & backward processing function		Fins i tot funció de control de ritme
	Funció de processament automàtic de velocitat d'arcs petits		Funció de processament de cercles
	Modes de processament parcial i suau
Abrasive Feeder	Max. inlet air pressure	0.6Mpa
	Min. inlet air flow	0.028m3/min
	Abrasive capacity	225KG
	Característiques
	Vàlvula d'aire per evitar embussos i trencaments	Autosegellant
	Control automàtic amb funció auxiliar CNC	Slightly adjust the flow

Dual-Core Waterjet Debut

APW pioneered “Dual-Core” waterjet, which integrated SIEMENS motor, imported REXROTH hydraulic pump and hydraulic valves assembly, American A&V intensifier, American high pressure tube and stainless steel water tank. This dual intensifiers design (for mini waterjet cutting machine ) represents another landmark in APW history.

They has been widely used in all APW waterjet series. UP to now, APW is still the only waterjet manufacturer holding this advanced technology in China.

Imported components

We adopt the imported components (for mini waterjet cutting machine) like Rexroth hydraulic pump; USA intensifier; Siemens motor; Omron PLC; Yaskawa servo driver, Yuken direction control valves etc. The whole parts of intensifier is assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.

The features of small màquina de tall per raig d'aigua

1. It does not cause heat effect or deformation or tiny cracks

2. It can cut any complex and flat figures

3. Narrow kerfs

4. Smooth incision

5. Minimize dust and toxic fumes, provide healthier working environment

6. It can be adjusted easily and quickly by the designs and materials

7. Low processing cost in unit time.

8. Components are avoid water permeate the composite materials

9. Drilling holes to avoid water permeate the composite materials

10. Reduce setting time and fixture cost

The cutting speed for small màquina de tall per raig d'aigua

The cutting speed of small water jet cutting machine varies depending on the material, thickness, desired cut quality, water pressure and the machine itself configuration, Generally for APW waterjet, you could find the following speed just for your reference.

Material	Gruix (mm)	Cutting speed of 300Mpa pump(mm/min)	Cutting speed of 380Mpa pump(mm/min)
Marbre	20	300	380
Marbre	30	200	300
Granit	20	250	330
Granit	30	150	200
Glass Brick	12	800	960
Vidre	5	1200	1500
	10	500	600
	20	350	420
Glue Chipped Glass	10	450	540
Esponja	50	5000	6000
Escuma	50	5000	6000
Fusta	10	1000	1200
Fusta	50	200	240
Acer	2	600	720
	4	400	500
	6	300	420
	8	200	300
	10	120	200
	15	75	120
	20	30	50
	60	12	20
Laminats	10	1500	1800
Alumini	5	350	500
Coure	5	350	420
Glass Fiber Reinforced Plastic	2	1200	1500

FAQ

1. What are the benefits of purchasing a mini waterjet comparing CNC plasma or a laser ?

Versatility
Small water jet cutting machine can cut almost anything – from metal to stone to glass to composites to ceramic.
Laser and plasma cut with heat, and so can only cut materials that have the right thermal properties. Metal is almost always the target material in industry for these heat-based processes. And mild steel is almost always the metal that is cut by them. In addition, plasma can only cut things that are electrically conductive. To optimize laser and plasma cutting, change to gasses is required. No change to waterjet parameters, except speed, is usually required for any material.
Gruix
Mini water jet cutting machine can cut very thin and up to 150mm (sometimes more) of any metal, glass, stone, composite, etc.
Laser cuts very thin and up to 20mm.
Plasma cuts from about 25mm up to 30mm.
Edge finish
Nothing cut by a plasma or laser will be as high of quality of an edge as a mini waterjet cutting machine. We leave behind a smooth edge. No heat affected zones or mechanical stresses are introduced. The plasma and laser cut with heat (we cut with supersonic erosion). Plasma and laser therefore will leave behind a heat affected zones, mechanical stresses, and especially with plasma, dross 'drips' on the edge.

Please contact us for more information of our màquina de tall per raig d'aigua.

2. What kind of material does your mini waterjet cutting machine can cut?

There are plenty materials our mini waterjet cutting machine can cut , such as metal stone glass foam plastic rubber, ect.
4-axis was professionally designed for mable pattern and medallion.
5-axis was professionally designed for 3D materials.

3. Quin és el teu mini màquina de tall de raig d’aiguaEl gruix màxim de tall?

The max.cutting thickness of our mini màquina de tall de raig d’aigua depends on the materials you cut .
Generally speaking, the thickness of our mini waterjet cutting machine can be up to 150mm, virtually Z constraint is the only limit to thickness.